贝尔7360开局文档

liffeii

配置OLT密码：
Would you like a TL1 login(T) or TL1 normal session(N) ? [N]: t
Enter Username   : SUPERUSER
Enter Password   : ANS#150

预配置：
configure equipment slot nt-a planned-type fant-f  
configure equipment slot nt-b planned-type fant-f
configure equipment slot acu:1/1 planned-type ngfc-f
configure equipment protection-group 1 admin-status unlock
configure system security profile admin slot-numbering type-based
configure system port-num-in-proto type-based
configure equipment fan-tray fanmode protect
configure system max-lt-link-speed  link-speed forty-gb
admin save

admin equipment reboot-isam with-self-test
configure system security operator isadmin prompt 7360_FX-8%d%c
配置1到3槽的LT板（现场根据LT板卡数量来灵活配置）
configure equipment slot lt:1/1/1 planned-type fglt-a      GPON板卡
打开LT1上的8个pon口
configure pon interface 1/1/1/1 auth-method loidpre admin-state up
configure pon interface 1/1/1/2 auth-method loidpre admin-state up
configure pon interface 1/1/1/3 auth-method loidpre admin-state up
configure pon interface 1/1/1/4 auth-method loidpre admin-state up
configure pon interface 1/1/1/5 auth-method loidpre admin-state up
configure pon interface 1/1/1/6 auth-method loidpre admin-state up
configure pon interface 1/1/1/7 auth-method loidpre admin-state up
configure pon interface 1/1/1/8 auth-method loidpre admin-state up
configure pon interface 1/1/1/9 auth-method loidpre admin-state up
configure pon interface 1/1/1/10 auth-method loidpre admin-state up
configure pon interface 1/1/1/11 auth-method loidpre admin-state up
configure pon interface 1/1/1/12 auth-method loidpre admin-state up
configure pon interface 1/1/1/13 auth-method loidpre admin-state up
configure pon interface 1/1/1/14 auth-method loidpre admin-state up
configure pon interface 1/1/1/15 auth-method loidpre admin-state up
configure pon interface 1/1/1/16 auth-method loidpre admin-state up

configure router static-route 0.0.0.0/0 next-hop 11.153.69.1   
configure service ies 2 customer 1 create   
configure service ies 2 interface "OAM" create   
configure service ies 2 interface "OAM" address 10.113.69.2/24
configure service ies 2 interface "OAM" sap nt:vp:1:2 create  
configure service ies 2  no shutdown  
                        
configure service vpls 3 customer 1 v-vpls vlan 2 create   
configure service vpls 3  sap nt-a:xfp:1:2 create
configure service vpls 3  sap nt-b:xfp:1:2 create
configure service vpls 3 no shutdown

configure system auto-laser-shutdown action disable

admin save